Types of Bank Guarantee in India: Meaning, Uses, Process and Cost of Each Type
Updated: 5 days ago
TL;DR
Seven types of bank guarantee come up in Indian contracts, and each one covers a different risk at a different stage. To get the right one on time, do these things:
Match the type to the contract stage, because a bid guarantee, a performance guarantee and an advance payment guarantee cannot replace each other.
Take the type, amount, validity and format from the tender document, because the bank follows the owner’s format and not its own.
Apply to the bank early, because every guarantee needs a bank limit, a margin and processing time.
Work out the full cost before you bid, because commission, GST, stamp duty, fees and a blocked margin add up for as long as the guarantee runs.
Check whether the tender accepts an insurance surety bond, because it can replace most of these guarantees without using your bank limit.
Introduction
A contractor opens a tender and finds “bid security”, “performance guarantee”, “advance payment guarantee” and “unconditional bank guarantee” in the same document. The contractor knows a bank guarantee is needed, but not whether these are four guarantees or one, when each is due, or what each will cost.
Here is a hypothetical example of what goes wrong. The contractor asks the bank for “a bank guarantee” without naming the type. The bank issues a general guarantee, the owner returns it because it does not match the tender, and the bid deadline passes while the bank re-issues it.
The lesson is that every guarantee has a type, a stage and a format, and all three must match the tender. This blog explains what a bank guarantee is and covers the different types of bank guarantee in India, with where each is needed, how to get it and what it costs. It then compares the types, explains the rules behind them and shows the alternative to a bank guarantee.
What Is a Bank Guarantee?
A bank guarantee is a promise from a bank to pay the owner of a project if the contractor fails to meet the contract. The owner is called the beneficiary, and the contractor who asks for the guarantee is called the applicant.
Three parties are involved in every guarantee:
The contractor: applies to the bank, pays the commission and usually deposits a margin.
The bank: issues the guarantee and pays if a valid claim is made.
The owner: receives the guarantee and can claim on it if the contractor defaults.
The Indian Contract Act, 1872 defines a contract of guarantee as a contract to perform the promise, or discharge the liability, of a third person in case of default. According to a Legal 500 article by Karanjawala & Co., a bank guarantee is an independent contract between the bank and the owner, separate from the contract between the owner and the contractor.
That independence has a practical result. When the owner invokes the guarantee, the bank has to honour it even if the contractor and the owner are in a dispute. The owner gets money quickly, and the contractor has to sort out any disagreement afterwards. This is why owners ask for guarantees, and why contractors need to read the wording carefully.
How Many Types of Bank Guarantee Are There?
There is no single official list of types. The Bank of Baroda lists six: financial, performance, bid bond, advance payment, deferred payment and foreign bank guarantees. Other banks and finance sites list four to six, and Bank of India also names customs guarantees. The count differs because guarantees can be sorted in several ways.
This blog covers the seven types that contractors meet in Indian contracts:
Bid or tender guarantee
Performance guarantee
Advance payment guarantee
Retention money guarantee
Maintenance or defect liability guarantee
Financial guarantee
Deferred payment guarantee
The first five follow the stages of a contract, from bidding to handover. The last two cover payment obligations. Each section below explains what the type is, where it is needed, how to get it and what it costs, with a short hypothetical example.
1. Bid or Tender Bank Guarantee
A bid guarantee is submitted with the bid. It protects the owner if the bidder withdraws the bid, changes it or refuses to sign the contract after winning. In local tenders it is often called an earnest money deposit guarantee.
Where it is needed: Tenders that ask for bid security need it at the bidding stage. The Department of Expenditure’s Manual for Procurement of Works, 2025 says bid security, also known as earnest money deposit, is obtained from bidders along with their bids. For goods, GFR Rule 170 provides a percentage range for bid security, and the tender states the exact amount.
How to get it:
Find the bid security clause and note the amount, the validity and the format.
Check that your sanctioned non-fund-based limit has room for the amount.
Apply to your bank with the tender clause, the format and the bid deadline.
Pay the margin the bank asks for.
Collect the guarantee, check every detail against the format, and submit it with the bid.
What it costs: The amount is set by the tender and the validity is short, so the commission is small. The larger cost is the margin, because cash is locked for every tender you bid on at the same time. A contractor bidding on five tenders at once has margin locked on all five.
Example (hypothetical): A contractor bids for a drainage works tender that asks for a bid guarantee valid for 120 days. The bank issues one valid for 90 days by mistake, and the owner rejects the bid. The fix is to compare the validity with the tender before leaving the bank.
What to watch for: The validity must cover the period the tender requires, and the wording must match the format. Apply early, because according to axiTrust’s guide to the hidden cost of a bank guarantee, banks typically take 3 to 7 working days for established borrowers and longer in busy periods.
2. Performance Bank Guarantee
A performance guarantee protects the owner if the contractor delivers late, delivers poorly or does not deliver at all. If the contractor fails, the bank pays the owner up to the guarantee amount.
Where it is needed: The owner asks for it after the contract is awarded, and the contract states how soon it must be submitted. Under the Department of Expenditure’s OM of 29 December 2023, GFR Rule 171(i) sets performance security for goods, consultancy and non-consultancy services at 3% to 5% of the contract value. For works, the same OM says performance security plus security deposit or retention money stays at 3% to 10%. The Manual for Procurement of Works, 2025 says performance security for works should be three to ten per cent of the contract value, as specified in the tender documents.
How to get it:
Read the performance security clause in the award letter and the contract. Note the amount, the deadline and the format.
Ask your bank for its timeline as soon as you are shortlisted, because the deadline starts at award.
Apply with the award letter, the contract clause and the owner’s format.
Pay the margin and any fees.
Submit the guarantee before the deadline, and keep a copy.
What it costs: Performance guarantees usually run for the whole contract, so the commission is charged for years. If the contract is extended, the commission, stamp duty and fees repeat at each renewal.
Example (hypothetical): A contractor wins a ₹10 crore works contract with a 5% performance guarantee, which is ₹50 lakh. The project runs six months late, so the contractor has to extend the guarantee and pay the commission again. If the guarantee expires first, the owner may treat the contractor as having no security.
What to watch for: Ask the bank for an extension before the guarantee expires. Our guide to bank guarantee invocation, extension and release explains how.
3. Advance Payment Bank Guarantee
An advance payment guarantee protects the advance the owner pays before work starts. If the contractor takes the advance and does not perform, the bank returns the advance to the owner.
Where it is needed: Contracts that include an advance, often called a mobilisation advance, may ask for it. The Department of Expenditure’s works manual has a provision on advance payments to enable mobilisation, and the contract states how the advance is secured. Owners commonly ask for a guarantee before releasing the money, so check the advance clause.
How to get it:
Read the advance clause and note the amount, the recovery method and the validity.
Ask your bank for the guarantee before the advance is due.
Submit the guarantee to the owner, who then releases the advance.
What it costs: The commission is charged on the advance amount, not on the contract value. Check whether the tender lets the guarantee reduce as the advance is recovered through bills, because a lower amount means a lower commission.
Example (hypothetical): An owner agrees to pay a ₹1 crore mobilisation advance. The contractor gives the bank the advance clause, receives a ₹1 crore guarantee, and submits it. The owner releases the money, and the contractor uses it to set up the site.
What to watch for: The guarantee should match the advance amount and the recovery schedule in the contract.
4. Retention Money Bank Guarantee
Owners often hold back a part of each bill as retention money. A retention money guarantee gives the owner the same protection, so that the contractor receives the held money earlier.
Where it is needed: It is used during the contract, and only where the tender allows it. The 2023 OM treats performance security plus security deposit or retention money together as one range, 3% to 10% for works. The works manual also has a section on security deposit and retention money, so the concept is standard in government works contracts.
How to get it:
Check that the contract allows a guarantee in place of retention.
Ask the owner for the format.
Apply to your bank for a guarantee equal to the retention amount.
Submit it to the owner, and ask the owner to release the retention.
What it costs: You pay commission and use your bank limit, but the retention cash comes back to you. The trade is a fee in exchange for working capital.
Example (hypothetical): A contract holds 5% of each bill as retention. After ₹2 crore of billing, ₹10 lakh is held. If the contract allows it, a ₹10 lakh guarantee lets the contractor receive that ₹10 lakh now.
What to watch for: The format states how long the guarantee must stay valid. Check whether that period is tied to the defect liability period named in the contract.
5. Maintenance or Defect Liability Bank Guarantee
A maintenance guarantee covers repairs of defects that appear after the work is handed over. If the contractor does not fix them, the bank pays the owner.
Where it is needed: It is needed at handover and runs through the defect liability period named in the contract. Some contracts ask for it separately. Others extend the performance guarantee through that period instead, so check which applies.
How to get it:
Read the defect liability clause and note how long it runs.
Apply to your bank with the clause and the owner’s format.
Submit it at handover, and replace or release the earlier guarantee only as the contract allows.
What it costs: The commission is charged on the guarantee amount for the whole defect liability period, so a long period adds up even when the amount is modest.
Example (hypothetical): A building is handed over with a 12-month defect liability period. In month eight, the roof leaks and the contractor does not repair it. The owner claims on the guarantee, and the bank pays up to the guarantee amount.
What to watch for: Make sure the validity covers the full defect liability period plus any claim period the format asks for.
6. Financial Bank Guarantee
A financial guarantee covers a money obligation. If the contractor does not pay an amount that is due, the bank pays instead. On Quora, a banker explains the difference by saying that a performance guarantee covers failure to do the work, and a financial guarantee covers a financial commitment.
Where it is needed: Someone who needs assurance that a payment will be made asks for it. An example is a company that must pay a government body an amount under dispute.
How to get it:
Gather the document that creates the payment obligation.
Apply to your bank with that document and your financial statements.
Expect the bank to examine your finances, because the bank pays if you do not.
What it costs: The commission and margin depend on the bank and on your credit profile. Ask the bank for its rate before you commit, because rates differ by bank and by type.
Example (hypothetical): A company contests a payment demand from an authority. The authority asks for a financial guarantee while the dispute is decided, and the company’s bank issues it. If the company loses and does not pay, the bank pays the authority.
What to watch for: The trigger is a missed payment, so the owner’s claim is usually easy to prove.
7. Deferred Payment Bank Guarantee
A deferred payment guarantee backs payments made in instalments, such as for equipment or machinery bought on credit. If an instalment is missed, the bank pays the seller.
Where it is needed: A contractor who buys plant or machinery and agrees to pay over time may need it.
How to get it:
Get the purchase agreement and the instalment schedule.
Apply to your bank with both documents and your financial statements.
The bank issues the guarantee in favour of the seller.
What it costs: The guarantee runs for the whole instalment period, so the commission is charged for that full period.
Example (hypothetical): A contractor buys a ₹2 crore excavator and agrees to pay in four yearly instalments. The seller asks for a bank guarantee covering the instalments. If the contractor misses the third payment, the bank pays the seller.
What to watch for: Ask the bank whether the guarantee amount and the commission reduce as instalments are paid.
What Are the Differences Between the Types of Bank Guarantee?

The table below compares the types side by side.
Type | Contract stage | What it protects | Amount is based on | Main cost to watch |
Bid or tender | At bidding | The owner, if the bidder withdraws or will not sign | The tender’s bid security clause | Margin locked on every concurrent bid |
Performance | After award | The owner, if the work is not done as agreed | The contract’s performance security clause | Commission over the full contract period |
Advance payment | When the advance is paid | The advance the owner has paid | The advance amount | Commission on the advance until it is recovered |
Retention money | During the contract | The retention money held back from bills | The retention amount | Commission, in exchange for early release of cash |
Maintenance | After handover | The owner, against defects that appear later | The contract’s defect liability clause | A long period of commission |
Financial | When a payment is due | A payment obligation | The amount owed | The bank’s rate and scrutiny |
Deferred payment | When payment is made in instalments | The unpaid instalments | The instalment schedule | Commission for the whole instalment period |
How Do You Know Which Type of Bank Guarantee Your Tender Needs?
Start with the tender document, because the type, amount, validity and format all come from there. Then work through these checks:
Find the bid security or earnest money clause, and note the amount and how long the guarantee must stay valid.
Find the performance security clause, and note when it must be submitted after award.
Look for an advance payment clause, and check whether it asks for a guarantee equal to the advance.
Check the retention money or security deposit clause, and see whether a guarantee is allowed in place of retention.
Look for a defect liability clause, and note whether it asks for a separate guarantee.
Check whether the tender asks for an unconditional guarantee and what format the owner requires.
If a clause is unclear, ask the owner through the pre-bid query process before you go to the bank.
What Do All Types of Bank Guarantee Have in Common?
Whatever its purpose, every bank guarantee follows the same basic rules. The table below shows what is shared and what it means for you.
What is common | What it means for you |
Issued by a bank against your credit relationship | Every guarantee uses part of your non-fund-based bank limit |
Margin | The bank usually asks for a cash deposit, which stays locked until release |
Commission, GST, stamp duty and fees | You pay these for as long as the guarantee runs, and again at each renewal |
Independent contract | The bank pays a valid claim even if you and the owner are in a dispute |
Wording set by the owner | A small mismatch with the owner’s format can lead to rejection |
Conditional or unconditional | Any type can be either, and the wording decides which |
Validity | The guarantee must be extended if the contract runs late |
Release | The guarantee ends only when the owner returns it or the bank closes it, and the margin is freed after that |
Format | Any type can be issued on paper or as an e-bank guarantee |
Because every guarantee uses the same bank limit and margin, a contract that needs a bid guarantee, a performance guarantee and an advance payment guarantee can use up the limit three times over. That is why many contractors ask whether the owner will accept something else.
How Do You Apply for a Bank Guarantee?
The steps are the same for every type. The Bank of Baroda describes the process as follows:
Submit an application with the required documents.
Provide financial statements and contract details.
Offer collateral or a margin, if the bank asks for it.
The bank assesses your creditworthiness.
The bank issues the guarantee.
The bank will tell you which documents it needs. In practice, add two steps at the start and the end. Before applying, read the tender for the type, amount, validity and format, and check how much of your sanctioned limit is free. After the guarantee is issued, check every detail against the owner’s format before you submit it, then set a reminder for the expiry date.
How Much Does a Bank Guarantee Cost?
The cost is built from the same parts for every type. According to axiTrust’s guide to the hidden cost of a bank guarantee, the parts are:
Commission: It typically runs from 1.25% to 3.5% per year, depending on the bank and the contractor’s credit profile.
GST: 18% is added on the commission.
Stamp duty: It varies by state and is charged each time a guarantee is issued.
Processing fees: These are charged each time a guarantee is issued.
Margin: Cash that the bank asks you to deposit. For contractors with limited credit history or fully used limits, the guide says it can range from 50% to 100% of the guarantee amount.
Here is a hypothetical example with assumed figures. A contractor wins a ₹10 crore works contract with a 5% performance guarantee, which is ₹50 lakh and falls within the 3% to 10% range for works. The commission is 2% a year for three years, and the bank asks for a 50% margin.
Cost item | Working | Amount |
Commission | ₹50 lakh × 2% × 3 years | ₹3,00,000 |
GST on commission | 18% of ₹3,00,000 | ₹54,000 |
Commission plus GST | ₹3,54,000 | |
Margin locked | 50% of ₹50 lakh, for three years | ₹25,00,000 |
Stamp duty and processing fees are extra, and they repeat if the guarantee is renewed. The margin is the larger cost in practice, because ₹25 lakh sits with the bank instead of working in the business. A bank’s own rate card is the final word on rates.
What Is a Conditional vs an Unconditional Bank Guarantee?
The seven types above describe the purpose. Among the various types of bank guarantee, another split describes what the owner must show before the bank pays, and it applies to every type.
Unconditional guarantee: The bank pays “unconditionally and irrevocably” on the owner’s first demand. According to the Legal 500 article, the owner is the sole judge of whether the contract was performed, and the bank cannot question the demand or ask for evidence.
Conditional guarantee: The guarantee sets conditions that must be met before the owner can claim, so the owner does not have a free right to demand immediate payment.
The wording matters more than the label. The same article notes that some guarantees use the words “unconditionally and irrevocably” but then attach a condition that must happen before the guarantee can be cashed. Such a guarantee is treated as conditional.
This is also the answer to a question people often ask: can a bank be stopped from paying? According to the article, Indian courts allow it only in two situations: fraud of an egregious nature that affects the whole transaction, and special equities, where payment would cause irretrievable injustice. An ordinary contract dispute is not enough.
What Is a Direct vs an Indirect Bank Guarantee?
This split is about who issues the guarantee. The Legal 500 article describes both.
Direct guarantee: The contractor’s bank issues the guarantee in favour of the owner.
Indirect guarantee: A second bank issues a guarantee in return for one already issued. If the second bank suffers a loss on a claim, the first bank compensates it.
The tender document or your bank will tell you whether an indirect guarantee is needed. Ask your bank if the owner is outside India or asks for a guarantee from a particular bank.
Is an e-Bank Guarantee a Separate Type?
No. An e-bank guarantee is a format, not a type. It is a bank guarantee that is issued, stamped and signed digitally, and it can still be a bid, performance or any other type by purpose. GFR Rule 171(i), as amended in 2023, lists “Bank Guarantee (including e-Bank Guarantee)” among the accepted forms of performance security. Our guide to the e-bank guarantee explains how the digital process works.
What Rules Govern Bank Guarantees in Government Contracts?
Several documents decide what a government owner can ask for. These are the ones a contractor will meet:
GFR Rule 170: It covers bid security for goods, and the tender states the exact amount.
GFR Rule 171(i): As amended on 29 December 2023, it sets performance security for goods, consultancy and non-consultancy services at 3% to 5%. It lists insurance surety bonds, account payee demand drafts, fixed deposit receipts, bank guarantees (including e-bank guarantees) and online payment as accepted forms.
Manual for Procurement of Works, 2025: It sets performance security for works at 3% to 10% of the contract value, as specified in the tender documents, and has sections on bid security, security deposit and retention money, and verification of bank guarantees.
GFR amendment of February 2022: It added insurance surety bonds as a security instrument.
State governments and PSUs publish their own conditions in the tender document, so the tender always governs. Check it for the exact type, amount and validity.
What Is the Alternative to a Bank Guarantee?
The alternative is an insurance surety bond, which is issued by an insurer and not by your bank. It is not a future idea. The Department of Expenditure’s 2022 GFR amendment allows insurance surety bonds as a security instrument, and GFR Rule 171(i) lists them first among the accepted forms of performance security. A surety bond typically does not use your bank limit, but each tender decides what it accepts, so confirm in the tender.
The table below shows which surety bond replaces which bank guarantee.
Bank guarantee | Insurance surety bond alternative | Note |
Bid or tender guarantee | Used in place of the earnest money deposit | |
Performance guarantee | The most widely used surety bond for contracts | |
Advance payment guarantee | Also called a mobilisation advance bond | |
Retention money guarantee | Less commonly issued so far | |
Maintenance guarantee | Maintenance bond | Not yet widely issued |
Financial and deferred payment guarantee | Ask an insurer | Surety bonds are mainly used for contract obligations |
Contractors often ask why so many still choose bank guarantees when a surety bond is allowed. Bank guarantees are familiar, owners and banks have used them for decades, and some tenders still ask for them. The digital side is also newer. Business Standard reported in September 2025 that a Tata AIG executive said most surety bonds were issued on paper because owners insisted on a physical copy. That is why the first step is to check the tender, not to assume.
How Does axiTrust Help With Insurance Surety Bonds?
axiTrust is a technology and consulting platform for insurance surety bonds. It is not an insurer or a broker, and it does not issue bank guarantees. All bonds are issued by IRDAI-licensed insurers. If your tender accepts a surety bond in place of a bank guarantee, axiTrust helps in three ways:
Acceptance check: We check whether your tender accepts an insurance surety bond for each stage, because that decides which bank guarantees you can replace.
Cost comparison: We compare the full cost of the bank guarantee against the surety bond, including commission, margin and the bank limit it uses.
Application support: We help you prepare the application and connect you with IRDAI-licensed insurers.
FAQs
What are the two main types of guarantees?
The two groups most often named are financial guarantees and performance guarantees. A financial guarantee covers a payment, and a performance guarantee covers the work. Bid, advance payment and the other types are variations used at specific stages.
What is the difference between a bank guarantee and a letter of credit?
A bank guarantee is a fallback that pays only if the contractor fails to meet an obligation. A letter of credit pays once agreed conditions are met, and it is used widely in trade. Bank guarantees are common in tenders and project contracts.
Is a bank guarantee the same as a security deposit?
No. A security deposit means the money is paid or blocked upfront. A bank guarantee is a promise by the bank to pay only if the contractor defaults, so the contractor keeps more cash, although a margin is usually blocked.
Can a bank guarantee be issued without collateral?
Sometimes. According to the Bank of Baroda, banks may do so based on strong credit history, relationship strength or approved credit limits, and each case is assessed individually.
What is the maximum amount of a bank guarantee?
There is no fixed maximum. The Bank of Baroda says it depends on the applicant’s creditworthiness, sanctioned limits, collateral and bank policy.
Can a bank guarantee be cancelled or changed before it expires?
Yes, but only with the consent of the owner. The Bank of Baroda says cancellation needs the owner’s consent, and changes to the amount or validity need approval from all parties, including the issuing bank.




