top of page

Security Deposit in Tenders: Percentage, Deduction, Refund and MSME Exemption

5 days ago
8 min read
3D illustration of a blue safe with a gold dial holding a contractor security deposit, beside an orange hard hat, stacked gold rupee coins, a running bill with a red down arrow and a green check badge

TL;DR

  • Definition: A security deposit is money the owner holds from your running bills to cover defects, and returns after the defect liability period.

  • How to get started: Read the security deposit clause in your tender for the percentage, accepted forms and refund date.

  • Problem: On a ₹10 crore contract at 2.5%, about ₹25 lakh stays locked for a year or more, and MSME exemption does not cover it.

  • Solution: Claim the refund in writing the day the defect liability period ends. If the department delays, the Supreme Court has allowed interest on money held past the contract’s refund period.

  • Alternative: Where your tender allows it, an insurance surety bond can replace the cash deduction.

  • Next step: Check if your tender accepts a bond, and compare its premium with the cost of your locked cash.


Introduction

You won the tender, the EMD is back with you, and the performance guarantee is arranged. Then your first running bill arrives and it is smaller than you expected, because the department has deducted a security deposit from it. Most contractors do not plan for this deduction since it never appears as a payment and only reduces every bill, and on a ₹10 crore contract at 2.5% the department ends up holding ₹25 lakh of your money, usually until a year or more after the work is finished.

This article explains how much the security deposit usually is, when it comes back, what you can do if the refund is late, and whether your MSME registration helps. It also shows you an alternative that can help free that cash where your tender allows it.


What Is a Security Deposit in a Tender?

A security deposit is money that the project owner keeps from the contractor to cover defects and default, both during the contract and during the defect liability period that follows. In works contracts, the owner usually collects it by deducting a fixed percentage from every running bill and from the final bill, so the contractor never writes a cheque for it.

The tender document decides which form the deposit takes. The common forms are:

  • Bill deductions: The owner deducts a percentage from each running bill and the final bill, which is the most common method in works contracts.

  • Cash or fixed deposit: Some tenders ask for the amount upfront as a demand draft or fixed deposit receipt.

  • Bank guarantee or insurance surety bond: Some tenders accept one of these in place of cash, but only when the clause says so.


How Is a Security Deposit Different From EMD, Performance Guarantee and Retention Money?

These four terms sit close together and are often mixed up, so the table below shows where each one fits.


EMD

Performance guarantee

Security deposit

Retention money

Given

With the bid

After award

During the contract

During the contract

Purpose

Shows the bidder is serious

Covers failure to perform

Covers defects and default

Covers defects until acceptance

Usual form

Cash, bank guarantee, insurance surety bond

Bank guarantee, insurance surety bond, cash

Bill deductions or a substitute

Bill deductions or a substitute

Returned

After the tender is decided

After the contract or defect period

After the defect period or final bill

As the contract states

Some contracts use “security deposit” and “retention money” for the same thing, so the wording in your own tender is what counts. You can read more about those stages in our retention money bond guide and our guide to types of bid security.


How Much Is the Security Deposit in Government Tenders?

There is no single national percentage, because each department sets its own figure in the tender. The main reference points are:

  • CPWD works: The CPWD General Conditions of Contract set the security deposit at 2.5% of the tendered amount, deducted from running bills and the final bill, while the performance guarantee is a separate amount set in the tender.

  • Goods and services (central government): The Department of Expenditure’s office memorandum of 1 January 2024 amends GFR Rule 171(i) and allows performance security of 3% to 5%.

  • Works (central government): The Department of Expenditure’s Manual for Procurement of Works 2025 allows performance security of 3% to 10%.

  • Railways, NHAI, state departments and PSUs: Each sets its own figures and recovery method, so the tender you sign is the final word.


How Is the Security Deposit Deducted From Your Bills?

Bar chart of a security deposit building up on a hypothetical ₹10 crore works contract at 2.5% per running bill: ₹6.25 lakh at 25% complete, ₹12.5 lakh at 50%, ₹18.75 lakh at 75% and ₹25 lakh at 100%

The owner deducts the security deposit as a fixed percentage of every running bill, so the amount held grows as the work progresses. Here is a hypothetical ₹10 crore works contract with a 2.5% deduction from each bill.

Work completed

Value billed

Deposit held (2.5%)

25%

₹2.5 crore

₹6.25 lakh

50%

₹5 crore

₹12.5 lakh

75%

₹7.5 crore

₹18.75 lakh

100%

₹10 crore

₹25 lakh

Every bill arrives smaller than the work you did, which means you fund part of the project from your own money or from borrowing. The cash deducted in the early months stays locked the longest.

Running several contracts with deposits deducted at once? Check with axiTrust how an insurance surety bond compares with leaving the cash locked.


When and How Do You Get the Security Deposit Back?

Most works contracts return the deposit after the defect liability period ends or after the final bill is paid, whichever is later. Some departments release it in stages instead of all at once. For example, a West Bengal PWD notification lets the deposit be held as a bank guarantee and releases it according to the work’s defect liability period: in full after one year for a one-year period, and 30% after two years and 70% after three years for a three-year period.

To claim the refund, follow these steps:

  • Send a written request: Address it to the engineer in charge as soon as the defect liability period ends.

  • Attach the documents: Include the completion certificate, proof that defects were fixed, and a no-claim certificate if the contract asks for one.

  • Keep copies and dates: The date of your request matters if the department delays the refund and you need to claim interest later.


What Are Your Rights if the Department Does Not Refund It?

A delayed refund can be challenged, and two recent decisions show how courts have treated these cases. In 2026, the Supreme Court decided State of Haryana v. Jai Durgaa Finvest and held that a no-interest clause is valid, but that interest (9% in that case) is payable when the owner keeps the money past the refund period in the contract. In March 2026, the Himachal Pradesh High Court held that a department cannot forfeit a security deposit without first giving the contractor a hearing.

These are decisions on their own facts and not legal advice. If your refund is late, take these steps in order:

  • Write to the department: Quote the contract clause and the date the refund fell due.

  • Follow the dispute process: Use the process written in your contract, such as a representation to the higher authority or arbitration.

  • Take legal advice: For large amounts, consult a lawyer who handles contract disputes.


Does MSME or GeM Exemption Apply to the Security Deposit?

No, the MSME exemption does not cover the security deposit. Under the Public Procurement Policy for Micro and Small Enterprises, 2012, the exemption is for EMD only, and the Ministry of MSME’s FAQ states that MSEs are not exempt from the security deposit or the performance bank guarantee. Three limits apply:

  • Works contracts are excluded: A small works contractor gets no benefit from this policy.

  • Central government and CPSUs only: State departments and private owners are not covered.

  • Goods and services only: Even there, the benefit is limited to EMD.

On GeM, the buyer’s bid document sets the security amount and any exemption. The GeM General Terms and Conditions include insurance surety bonds in the definition of performance security, so check the exact terms of each bid.


What Does a Locked Security Deposit Cost You?

A locked deposit has a cost even though the owner charges no fee, because you lose the return on that cash or pay interest on money borrowed to replace it. Take the same ₹10 crore contract and suppose the full ₹25 lakh is held for 12 months after completion. If your cost of funds is 10% a year (an assumption for this example), the cost is about ₹2.5 lakh for that year alone, and a late refund adds more.

Replacing the cash with a bank guarantee does not always solve this, because the bank charges commission and usually asks for a cash margin, as our post on the hidden cost of bank guarantees shows.




Can an Insurance Surety Bond Replace the Security Deposit?

In some tenders it can. In February 2022, the Department of Expenditure amended the General Financial Rules to allow insurance surety bonds as a security instrument in central government procurement (Office Memorandum F.No.1/1/2022-PPD, 2 February 2022), which put the bond alongside the bank guarantee as an accepted form of security.

Whether a bond can replace the deduction from your running bills depends on your tender clause. Some tenders allow a substitute for the deduction, while others fix the deduction and allow a substitute only for performance security, so check the clause and ask the owner in writing if the wording is unclear. The table below compares the three options.


Cash deduction

Bank guarantee

Insurance surety bond

Cash locked with the owner

Yes

No, but the bank usually takes a margin

No

Uses bank limits

No

Yes

No

Cost

Lost return on cash

Commission plus margin

Premium

Issued by

Not applicable

Bank

IRDAI-licensed insurer

As an illustration, a 1% premium on a ₹25 lakh bond is ₹25,000 a year, compared with ₹2.5 lakh of lost return in the example above. Actual premiums depend on the insurer and your profile. For the performance stage, see our performance bond guide.




How Does axiTrust Help With Insurance Surety Bonds?

axiTrust is a technology and consulting platform for insurance surety bonds. It does not issue bonds, and the insurer makes every underwriting decision. Here is how axiTrust helps in this situation:

  • Tender acceptance check: axiTrust helps you read the tender and confirm that an insurance surety bond is accepted for the security you need, before you apply.

  • Cost comparison: axiTrust compares the premium with your cost of locked cash and with the commission and margin on a bank guarantee, using your own contract numbers.

  • Application support: axiTrust helps you prepare the documents insurers ask for and connects you with licensed insurers.




FAQs

Often the winning bidder’s EMD is adjusted toward the security deposit or returned once performance security is submitted, and the tender clause says which.

The termination clause decides. Owners can usually use the deposit to cover their loss, but a forfeiture without a hearing can be challenged.

Many contracts allow recovery of amounts owed under the same contract, so read the recovery clause.

Many do, and private owners set the amount, form and refund period in the contract.

Only if the contract allows staged release or accepts a substitute instrument.


References

 
 

Trust Made Simple.

Technology · Consulting · Trust Infrastructure

Contact

Gurugram​

Ofis Square Tower,
Vatika Triangle Annexe,
1st floor, Mehrauli-Gurgaon Rd, Block B, Sushant Lok Phase I, Gurugram, Haryana 122009

Mumbai​

Code Coworking,
5th Flr, ITTS House Kala Ghoda, Lion Gate, Fort, Mumbai,
Maharashtra 400001

General Inquiries:

+91 92205 06149

Let's Talk

Reach out to use for more infromation.

  • LinkedIn
  • X

CIN Number:

U62013HR2024PTC123846

 

axiTrust Private Limited is a registered technology and consulting company that provides technology-enabled consulting services. We are not an insurance company, insurance broker or intermediary. All Insurance Surety Bonds are issued by IRDAI-licensed insurance companies. Information on this website is for informational purposes only and does not constitute an offer or solicitation to purchase any insurance or financial product. Views and analysis published here are those of axiTrust and do not constitute legal or financial advice.

© 2026 by axiTrust. All rights reserved.​

​

bottom of page